Series 1520/1580/1585
RSS
- How to get the vibration value?
- I cannot connect the circuit to the PC.
- I cannot flash the firmware.
- I found a broken connector on the PCB.
- I found a burnt component on the circuit.
- The load cells seem damaged: cracks, fragment, ripped white silicone.
- I have a broken connector on my load cells.
- My calibration did not pass.
- I think I have the wrong thrust / torque reading.
- My motor is spinning but I have no RPM reading.
- I found that the RPM reading is wrong.
- I find the RPM reading is fluctuating during the test.
- I have a wrong reading on the Electrical RPM Probe.
- I do not have any RPM reading.
